{"id":5420,"date":"2014-04-28T10:03:13","date_gmt":"2014-04-28T08:03:13","guid":{"rendered":"http:\/\/www.gsm-modem.de\/M2M\/?p=5420"},"modified":"2014-04-28T10:15:49","modified_gmt":"2014-04-28T08:15:49","slug":"embedded-lte-antenna","status":"publish","type":"post","link":"http:\/\/www.gsm-modem.de\/M2M\/m2m-componets\/embedded-lte-antenna\/","title":{"rendered":"Embedded LTE antenna in detail"},"content":{"rendered":"

Ceramic embedded LTE antenna<\/h2>\n

This LTE antenna with is very detailed documentation is a good example to explain the working of ceramic antennas on a PCB with different size of ground plane.<\/p>\n

\n
\"LTE<\/a>

LTE antenna efficiency<\/p><\/div>\n

I. Embedded LTE antenna efficiency<\/h3>\n

The antenna is resonating in all major LTE, GSM and HSPA bands and on Wi-Fi 2400 MHz and 5 GHz as well. The mentioned parameters are valid on a ground plane with size of 50 mm x 120 mm. The antenna efficiency was measured on a common PCB based on FR4 with a thickness of 1.6 mm.<\/p>\n

\n
\"Size<\/a>

Size of embedded LTE antenna <\/p><\/div>\n

II. Embedded LTE antenna dimensions<\/h3>\n

With 34 x 8.5 x 3.2 mm\u00b3 the antenna is already very small. The free space area is 50 mm x 20 mm on top of the PCB only.<\/p>\n

\n
\"Performance<\/a>

Performance of embedded LTE antenna<\/p><\/div>\n

III. Embedded LTE antenna performance on smaller ground plane<\/h3>\n

Most embedded antenna documentation does not tell, what will happen by changing of the recommended size of the ground plane. This embedded LTE antenna is telling the true on one few. In the lower bands it will lose performance as usual. The resonate frequency will shift in most of the mentioned frequency bands as well. With a matching circuit it is possible to reduce the detuning by the enclosure. Based on its high bandwidth in the lower bands, the antenna will be perfect for IoT \/ M2M applications on 2G or 3G modules. As told in the chapter for the self-made GSM Quad band Antenna – as bigger the bandwidth is as lower will be the effort for the tuning.<\/p>\n

\n
\"Eval<\/a>

Eval board for embedded LTE antenna<\/p><\/div>\n

IV. Cupper nose close to the embedded LTE antenna<\/h3>\n

The cupper nose is already a part of the LTE antenna. The strip line at the cupper free area is a part of the antenna as well. Do change the width of the strip line, because malfunction will occur.<\/p>\n

Summary of embedded LTE antenna<\/h3>\n

If there is a budget then the antenna structure can be changed. Even the design of an own customised LTE antenna is possible on small to medium quantities. The antenna is always the key to success in any wireless application. They selection of the right antenna in an early stage will decide between success and failure.<\/p>\n

If you still not sure which antenna to select and why, then do not hesitate to drop an email to harald.naumann (at) gsm-modem.de
\nEAD#<\/p>\n